086 18820390299
110mm-Three-Phase-Open-Loop-Stepper-Motor.jpg
110mm-Three-Phase-Open-Loop-Stepper-Motor.jpg

110mm Three-Phase Open-Loop Stepper Motor

Model:

Current:

Resistance:

Holding Torque:

Phase: 3

Step Angle: 1.2°

Brand: CYCFLO

Minimum order: 10

Send Inquiry
Product Description

1.2° / step

Flange size: □110mm
Angular error: ±0.06°
Insulation withstand voltage: 1500V AC / 1 minute
Insulation resistance: 100MΩ
Maximum surface temperature of the motor: 100°C
Humidity range: 20% RH – 90% RH
Permissible axial load: 150N
Permissible radial load: 490N (at 25mm from the mounting surface)

Technical Parameters

Stepper motors are not constant torque motors; the higher the running speed, the smaller the output torque. Therefore, when paying attention to the holding torque parameter of the motor, one should also focus on the output torque of the motor at the actual working speed (refer to the dynamic torque curve). We recommend reserving a 1.5 times margin to avoid step loss of the stepper motor under overload conditions.

Model (MODEL)

Holding Torque (N.m)

Rated Current (A)

Phase Resistance (Ω/phase)

Phase Inductance (mH/phase)

Rotor Inertia (g.cm²)

Max Motor Length (mm)

Motor Weight (Kg)

Suitable Driver (Recommendation)

SMC4201

8.0

4.3

1.04

4.3

6000

≤127.0

5.0

CSH-2272R 110~245VAC

SMC4202

12

6.0

0.6

2.67

9720

≤151.0

6.3

CSH-2272R 110~245VAC

SMC4203

16

6.4

0.7

2.96

13560

≤185.0

8.5

CSH-2272R 110~245VAC

SMC4204

20

6.9

0.57

4.26

17400

≤219.0

10.7

CSH-2272R 110~245VAC

Notes

  • The above recommended “Suitable Driver” is a pulse-type stepper motor driver. CYCFLO can also be supplied with:

    • Bus-type stepper motor drivers (RS485, CANopen, EtherCAT communication control, etc.)

    • Intelligent stepper motor drivers (with position tuning, built-in PLC programming functions, etc.)

110mm-Three-Phase-Open-Loop-Stepper-Motor-1.jpg

Send Inquiry